• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

The handles and hinges on your doors wear out with time and require to be replaced. In this case, it is essential that the new handles match the critical dimensions of the previous handle.

The three measurements you need to examine are the top screw's position as well as the key hole and lever sizes. Use the size guide to aid you.

Inline Lever/Lever

A lever/lever door handle is a modern handle that can be used on doors that are new or replacement. This style of handle is available in a variety of designs and finishes. This handle is available from several manufacturers including Avocet ERA Fullex Hoppe Mila Door Handles Millenco Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The uPVC/Composite door handles are made of robust materials and are ideal for doors with multi-point locks that require a heavy duty design. The handles are inline and run with the same spindle as well as screw fixings so they can be easily incorporated into new or existing uPVC/Composite doors.

The design of the sprung lever allows the handle to be positioned and angled to ensure a comfortable experience and is suitable for all users. The handle has been endurance-tested to 200,000 cycles. This helps ensure that the quality of finish and performance is maintained over time. The lever that springs is adjustable to fit a broad range of locks. This is especially useful for doors with narrower frames, where the cylinder is located further back. A shortened lever is also an ideal choice for doors where the latch can be activated by the thumb turn on the inside.

Lever Pad

A Lever Pad door handle made of upvc operates differently to the lever type handles on doors. These handles are operated by one spindle or two spindles, inline or offset. They are usually used on UPVC doors with double glazing. They come in a variety of finishes & variations.

The handles are available in a variety of finishes, including White Chrome and Gold. The finish is in line with BS EN 1670:2007 Grade 5 and is also resistant to corrosion, which gives the handle a high level of durability and performance for the intended use.

All of the UPVC lever pad styles for handles are supplied with the spindle and screws that allow them to be installed on any new or existing uPVC door. The backplate fixing centers of 211mm allow for a larger size handle that can be beneficial when replacing a faulty or worn multi-point door lock mechanism. The levers for these handles have springs, which can solve the problem of patio door handle handles that move out of horizontal position when not being used.

When choosing a replacement UPVC handle and spindle it is important to match the dimensions of the PZ on both the multipoint lock and the uPVC door. This measurement is often known as the "handle centre" or "cylinder centres which is a crucial aspect of matching up the correct handles.

Once you have the proper PZ size, you'll be required to make sure that the lever pads and push pads are of a suitable shape for the American with Disabilities Act (ADA) approved handles you require for your doors. They are usually a square or round design with an internal lever and an external push pad.

The majority of UPVC lever pads that we sell are sprung, meaning that they will return to their horizontal position when they are not in use, instead of hanging out and possibly sticking in the frame. This stops draughts from entering the home. The majority of UPVC lever pad style handles are available in left and right handed models that allow them to be installed on either side of the doors.

Euro Cylinder

Cylinder locks are usually found on replace upvc door handle doors, but can also be found on other types of door. They operate by using a key that unlock a cylinder case that is then revealed with pins that can be aligned with the pins in the lock body and permitting them to turn the cam, thereby opening the door. Euro cylinders are available with up to six pins. Doors that are internal and external require different levels of security.

The selection of a cylinder is crucial. It depends on the type of use your doors and handles receive. For instance, doors that are external require an extra secure cylinder, while doors inside can be secured using an ordinary cylinder. Certain cylinders are equipped with additional features that can improve security, such as anti-drill or anti bump properties.

To ensure that the euro cylinder is the correct size for your door, it should be measured accurately. The cylinder should be measured from the hole in the center of the fixing screw to the other end of the cylinder, including the thumb turn if you have one. If you are unable to measure with the lock in position, you can take it out of it. A cylinder that protrudes beyond the handle and escutcheon could be vulnerable to attacks, such as snapping locks, so it is important that it's not too long.

Most newer cylinders have been designed with bump and anti-drill features built into their design. These are designed to reduce the risk of attack by causing the cylinder to rotate in the opposite direction. This can help deflect the attack, and keep your door safe.

There are also cylinders that have been made to resist snapping. This is a growing method of attack on cylinders, where the break line inside the lock is targeted by a tool that is specially designed to snap off the front of the cylinder to allow the door to be opened. This is much quicker and less difficult than opening the door with multipoint locks. It also leaves no evidence of a burglary, which can impede an insurance claim.

Spring Cassette

This spring cassette is found inside the base plate of your door handle. It is a spring-loaded solution to help return the multipoint lock handles to their normal position after using. In the past, a lot of these types of handle did not have a spring integrated into them, and as a result, they are more likely to slide or drop when the locking window handle mechanism is disengaged. This simple part is the best solution to fix this problem. It also stops your door from becoming stuck in the open or closed position, as they aren't easy to close manually.

These spring cassettes were created to be used with a sprung multipoint locks. They won't work with handles that are not sprung and you'll need to cut a hole into your backplate for them to fit. (Please check the image for a technical diagram). They are a replacement for broken or missing cassettes within the backplate of the door handle for various kinds of uPVC doors. They have an elongated square that allows for an 8mm spindle to be used and are sold as a set.

These spring cassettes are an excellent value solution to the issue of door handles that have become sagging. These spring cassettes are easy to install and can extend the life of your uPVC door. Please contact our team to learn more about our range of uPVC accessories and spares. We are always available to provide professional advice and assistance you.