• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Sash Lock Door Handles

If you're looking to increase the security of your home without sacrificing the aesthetics, choose sash lock door handles. They can be used in conjunction with a mortice lock or sash lock, and can be combined with the nigh latch to offer additional security for doors.

The handles are made up of a lever/handle mounted on backplates and are typically used with a three or five lever mortice lock. They can be used in conjunction with tubes latches.

Lever Lock Handles

There are many different types of lever door handles available to match the decor of your home. Rustic lever latches work well with a ranch or farmhouse style decor and are also well-liked in modern homes. Classic lever handles are either round or spherical and easy to grasp. They are affordable and simple, and can be used with any type of decor. For a stylish style, choose a polished chrome or satin nickel handle. These finishes are durable and easy to clean. Antique bronze and polished Brass are also options. A lot of handles feature a decorative design, like small amber worm eyes, or long-horned crystals. Some feature an elongated pin or star built into the base of the lever.

To change the lever lock door handles, you need to have the correct screwdriver or tool to disassemble them. You may require an awl, or a nail based on the model and design. Some lever handles have tiny holes or a notch at the base of the handle which can be used to pry them open.

Follow the manufacturer's guidelines to remove your old handles when you have the right tool. You'll need to determine the size of the spindle on the new lever handle. Existing doors might have been morticed for previous latches and locks, which require a specific spindle. Most lever handle manufacturers offer a standardized door handle spindle size.

If you are replacing the handle on a door with a sash lock the old handle should be removed, and the tubular latch bolt, which sits inside the door, must be disconnected from the strike plate that is in the door frame. The next step is to drill a hole in the door frame, then insert the latch bolt through, and connect it to the strike plate inside the door frame.

It is important to remember that when you install new lever handles, all handles that comply with the ADA (Americans with Disabilities Act) are designed to operate by hand. The user must not be required to hold their hands tightly or twist their wrists. To be in compliance with ADA compliance standards, the lever door handle cannot be operated with the thumb and finger or the entire hand.

wooden sash windows Lock Handles

The primary function of sash lock door handles is to pull the sashes moving together in a tight seal. This helps to maintain the interior temperature of the home and prevents drafts. These are ideal for doors that do not require for a keyed lock.

Sash locks are also known as mortice sashlocks and combine a dead bolt and latch into a case that is fitted to the surface of the door. They work in conjunction with a pair of door handles and there are a myriad of choices to suit your home.

The lever handles for locking is operated by a lever that has an opening cut into the backplate below. This allows a key to be inserted into the mortice sash to operate it. It is most often used on doors that are not locked such as dining rooms and living rooms, but can be paired with a tubular latch on an internal door that is more secure.

They are designed to hold the sash double glazing together at multiple points, and have hooks that fit inside the keeper. They're available in different styles and designs that can be fitted into different types of windows, such as sliding or hinged casement windows. Some are made of cast aluminum while others are brass or wrought iron. They are available in a variety of finishes to match other elements of door furniture, like escutcheons, which guard the keyhole.

The 3 lever sash locks are suitable for use on doors with internal doors. They do not provide the level of security required by insurance companies. They also have lower resistance to forced entry, making them more vulnerable than their certificated 5 lever counterparts.

A door sash lock featuring five levers is a more secure option for exterior doors because it provides higher levels of resistance to forced entry and is more difficult to pick or bypass. These locks are a brand new design that has been tested and certified for compliance with stringent building regulations for fire, disability and security.

The first step in replacing a sash lock handle is to remove the old fastener by removing the screws from both ends. Make sure you have a screwdriver handy, and carefully separate the components to ensure that there is no damage. Mark with a pencil where the screw holes are, so you can line up the new fastener properly when you are putting it on. Remove any dust or paint flecks, then screw in the new fastener. Test the handle to make sure it works correctly and creates an airtight seal.

Tubular Latch Handles

The tubular latch is an internal latch that is operated by turning the handle. It is designed to latch a door shut but does not secure it like mortices. They are typically used on doors that are internal, and where locking is not required. They can be fitted either with knob or lever handles.

There are many sizes of tubular latches that are available. They range from the cheapest to top-of-the-line architectural quality. The size you choose depends on the usage of the door and if you require a lock function. If you need a thumbturn release mechanism for an emergency, then it is necessary to have a lockable latch.

The backset of your door will determine the latch you select. This is the distance between the edge of your door and the center of the hole that is used for the door handle knob or rose, and you should choose a latch that has the same backset measurement. This will ensure that your door handle or knobs will operate the latch with ease.

If you are installing a sprung or unsprung lever or door knob it is crucial to select a heavy duty tubular latch with a double glazed sash windows for listed buildings sprung follower and tongue. This will provide an effortless action for the latch, and prevent it from becoming slow and ineffective with frequent use.

Once you've selected the appropriate latch for your needs the next step is to install it to the door. The first step is to make sure that the latch is leveled to the top of the door frame/casing. Mark the position of the plate and drill holes. Countersink drill bits can help create the correct recess so that it can fit comfortably.

Once the latch is installed, you can screw it into the door. It is crucial to ensure that it is functioning properly prior to fitting the door handles and putting in the locks, so make sure to test it by opening and closing the door repeatedly. If the door isn't working properly, try lubricating the door using WD40. Then try it again. If you're still having issues, it could be necessary to call an expert locksmith or installer.

Keyhole Handles

Keyhole handles are fitted with a tubular latch placed inside the door to open and close it. The handle engages the latch when pushed down, and releases it when pulled up. These types of handles are usually used on internal doors such as living rooms and doors to dining rooms but can also be used on front doors when paired with the nightlatch.

Door knobs are a modern kind of handle that has a sprung lever/handle on a round or square fixing rose with an accompanying thumb turn or escutcheon. They come in various styles and finishes to suit the doors in your home. They can be used with Euro cylinders or multipoint locking systems for added security. This is accomplished by locking the door at multiple points along the height of the door. Door handles that are compatible with the lock require the correct size of the lock's center to fit the barrel.

A keyhole escutcheon covers the keyhole that is already in the door to hide it and give the handle a sleek appearance. They are available as either a screw-on or pop-on design and are available in a variety of finishes to match your door handle. A recessed escutcheon that is affixed to the edge of the door to conceal the keyhole and provide it with a more modern look, is also used.

The majority of the handles mentioned above are designed to be used with either a mortice lock or sash lock mechanism. However some are compatible with Euro Cylinder locks too. These are used on uPVC doors and require compatible door handles with a Euro cutout for a cylinder and the appropriate screw holes within the backplate to accommodate the euro cylinder. These handles also require a Euro Cylinder escutcheon, or a standard escutcheon depending on the use.

Whether you choose a mortice lock, sash lock or tubular latch for your door, it's essential to be aware of the different characteristics of each and the requirements they require to be compatible with the other components of your uPVC door system. You'll need to think about the door thickness as well as the door hinges and frame reinforcements as well as the door handle backplate size, lock centre dimensions and the screw centres for the cylinder.