• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great deal of damage to your home, making it very hazardous and possibly fatal. It is important to ensure that your windows are in good working order.

For single pane windows it is fairly easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. However when you have double pane windows that are held in place by internal beading it will be more difficult to remove the existing panes and install new ones. In this instance it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not onto the floor, where they could be trampled.

Once the glass has been removed from the window, it's best to seal the gap with clear packaging tape or duct tape to stop water and drafts from getting into the property until a professional comes out and fix the window. It also acts as a barrier that will prevent any intruders to gain access to your home. If the distance between the door and the window is large, you might prefer a security screen that also includes a window. This will give you the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows with sash. However, over time, they can suffer from a variety of issues like sliding. A window that is sagging can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from getting worse.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll need open the window to access the frame. Then, using a screwdriver, you can remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having moved your hinges. If you are happy with the size of the window, tighten the screws to keep them in the right position.

If you are unable to move the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and become dry and cause them to loosen. It is important to replace your seal as quickly as you can to ensure that your upvc window repair window watertight and draughtproof.

UPVC handles can also become loose. Often, this is caused by screws that have become loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's relatively simple to fix a loose upvc window repair near me handle. First, you'll need to close the window and do an initial fitting. The joint at the corner of the sash should align with the joint on the casing. If it doesn't, you can use a screwdriver or a wrench to loosen the handle, and then reverse the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains, it's crucial to take action. The leaks of water from windows do are not just a cause for destruction of your home's structure but also undermine your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a fairly simple fix that can be done by any DIY expert. Based on the severity of the problem the caulking that was used up may need to be removed before a fresh layer can be put on. It is crucial to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk and then make the area more difficult to clean and decrease the efficiency of your energy usage.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely the problem is with the seal than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open, or if it opens with a breeze. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical component hinges are prone to be damaged over time. The process of replacing a hinge on a window repairs is an easy process but it can be easier with someone else to help you hold the frame up.

Verify that the uPVC hinges open and close in the correct direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The problem can be caused either due to opening the window in the wrong way or due to a poor installation at the factory. This issue can be fixed by sending us a photo via our website and we will be more than happy to give you advice.

It is also crucial to lubricate the hinges regularly. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. Ideally, you should do this at least once a year. WD40 or other solvent-based oils should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different factors. The hinges can also be unbalanced due to wear, which can cause gaps between the frame and sash. This can be easily repaired by giving them a good clean, but in the event that they are beyond repair it may be necessary to have them re-aligned or replaced. Secondly the interlock, this is located on the hinge of the window, may be misaligned. Again, it's possible to give them a clean but in some instances it could be necessary to have these replaced.

The next most common cause of draughts is the window seals, these are prone to wear or damaged over time and let air escape through the gaps. Installing high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures and will lessen the possibility of draughts.

The last way to reduce draughts effectively is by using a Draught-excluder. These are usually made of fabric tubes filled with a filler that can be put on top of your window sill. They can help block out cold air and keep your home warm and cozy!

The windows made of upvc can keep providing excellent insulation and security in your home with a little regular maintenance and repairs. However, it is important to recognize that all windows have a life span and there may come the point when it's more cost-effective to replace them rather than fix them. If you encounter any issues with your upvc window it is recommended to speak with an expert immediately.