• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Electric Fireplace Wall Hanging Ideas

The wall-mount electric fireplaces are ready to use right out of the box. They're a great way to add the ambience without venting or renovation.

However, they typically require careful installation since they're typically heavy. Follow these steps to hang your brand new electric fireplace properly.

1. Connect the Brackets

A wall mounted electric fires uk-mounted electric fireplace or recessed electric fire instantly transforms any space. This is an excellent option for those who don't have fireplaces or live in apartments.

Decide where you want to install your electric fire. It is important to choose an area that isn't susceptible to moisture and at least a few inches away from furniture, drapes and high traffic areas. Once you've found a spot, mark the wall with markings for the top and bottom plates of the fireplace frame.

Use a tool such as a drill to drill exploratory holes in the wall, examining for studs with a detector and marking on the drywall for location of the fireplace mounting brackets. Then, you need to build out the wall or patch and paint the drywall to prepare it for fireplace installation.

Depending on the fireplace mounted to the wall you choose, you may need to install both the screen and firebox in one unit, or separate them with a wall bracket. If you're not sure of your abilities to manage this part of the project on your own, think about hiring an experienced general contractor or carpenter.

You can find an installation template that comes with all electric fireplaces. However it is recommended to keep a spirit level handy and a pencil to mark out the exact spot where the wall brackets will be erected. Before drilling, use the template to verify that the power cable of the fireplace can be able to connect from the installation site to an outlet near by for a convenient plug in.

When the studs and fireplace frame are in place, you can then install the drywall as smooth and flush as possible for a clean appearance. Add a piece of trim to the bottom edge and then paint and sand the entire frame for a finished appearance.

You'll need to insert the hooks or slots on the back of the majority of electric fireplace wall hanging fireplaces that are wall mounted into the mounting brackets. Make sure to align the slots or hooks before connecting the fire brackets. Once the fire is placed you can add additional elements like crystal embers, driftwood log pieces, or decorative rocks.

2. Check the Bottom Bracket

The space above the mantel, fireplace, or chimney breast is ideal for hanging artwork. However, there's a fine line between an artistic arrangement and one that distracts from the overall look of the fireplace's design.

A common rule is that a photograph should be at least 80% of the size of the mantel or fireplace it's placed on. This will help keep it in proportion and will make it look nice on the wall. Other ornaments & decorative items placed on the mantel could influence the size and proportional guideline.

If you plan to display a photo over your electric fire, the frame should be constructed of glass or a material that is able to withstand high temperatures. If you're not sure, you can test the frame using a heat-sensitive cloth to determine whether it's suitable for this purpose.

One of the most common concerns when displaying pictures above a fireplace is the risk of damage to the artwork due to smoke or heat that escapes. While this is not a huge issue with traditional wood or gas-powered fireplace, it's worth examining the recommendations of the manufacturer if you're planning to install an electric fireplace that is mounted on the wall.

The majority of electrical fires come with an installation bracket that can be fixed to the wall using hanging screws or wall-mounted fixing systems. It is recommended to drill an exploratory hole into an isolated area of the wall prior to mounting your electric fire. You can then use a pipe and cable locater to ensure that there aren't any cables or pipes near the position of mounting.

If there are, you can then decide to put your fire on top of the electrical socket or relocate it to a different location. If you decide to move it, you must make sure that the power cable will reach the electrical socket. This is essential for older homes or those with solid walls. If you don't do this, your electric fireplace will not function correctly. Some models come with an outline of where to drill holes, while others require you to use a spirit level and pencil to mark the locations on your wall.

3. Connect the Power Cord

If you've installed a recessed electrical fireplace, you may need to relocate the plug socket from the wall to behind the fireplace. This can create an elegant look. Test the fireplace first to ensure it functions properly.

Another method of mount an electric fireplace is to frame the space and incorporate it into the wall. This gives it a finished traditional look and also allows you to build mantels. The owner's guide for your particular model will give information on framing, wiring and securing the fire place.

If you're ready for mounting your new electric fireplace on the wall, start by marking the installation location with a marker or pencil. Make use of a carpenter's level ensure that the area of installation is level and flat. You can use a studfinder mark the location so that you can be sure you're drilling in a safe location.

Make use of your electric drill after having marked the installation location to make holes for bracket screws or hanging screws. Follow the instructions in your owner's guide for this step. This is particularly important if you're putting the fireplace in the drywall. If you are unsure how to do it then you can ask a professional for help.

You can also conceal power cords from view using an organizer kit for cables. These kits usually come with clips, sleeves, or boxes for bundling cables. You can also make use of fish tape or wire snake tools to help guide the cables through the wall. If you don't want to cut into your drywall or drywall, you can install a power bridge kit for cleaner and safer connections.

You can also camouflage cords by using paintable wire covers or by adhering them to the wall. Keep the cover or tacks enough away from heat sources. This will shield the cord from damage and also prevent accidental contact.

4. Connect the adapter

A wall-mounted electric fireplace is a fantastic option for a home renovation or for those who do not have the space or money to build a gas fireplace. They are simple to hang and can be used immediately out of the box and are an excellent choice for those who are seeking a modern electric wall mounted fire and stylish design or the warmth the fire can bring. They can be hung on any wall like art, and are electric with fan-powered heat.

Before you start the actual installation process it is a good idea to take stock of all the tools and equipment you will need. You can find the complete instructions on how to mount an electric fire in the user manual. Some models require you to screw brackets directly into the wall, while others may feature mounting plates that slide into slots or hooks onto the brackets. It is important to remove any combustible materials from the area you will be installing a recessive unit. In general you should keep these materials at least 3 feet from the front of the fireplace.

After you've checked all parts, you should plug in your electric fireplace and make sure that it is working properly. This is an essential step since it will ensure that the flame effect screen and heater work according to the specifications. This will give you a clear idea of the final product in its final position.

Cover the cord after you are sure that it's functioning properly. This will help keep the finished product neat and tidy. You can do this by applying paintable wire covers, or you can choose to install an outlet that allows you to put the cord behind the unit. This will give your fireplace a seamless appearance.