• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser Fitting

Protect your vehicle from key theft hacking, cloning and theft by using the world's first aftermarket CAN immobiliser. With the additional option of connecting to a Ghost app and GPS tracking system that can send you alerts to call when your car is altered with or stolen.

The installation of a Ghost immobiliser can be done by a trained technician. It is essential to have the right equipment and heat shrink tubing.

Getting Started

Ghost immobilisers are a great alternative to physical theft devices like car alarms and wheel locks. They guard your vehicle without using LED indicators or key fobs. They are directly connected to the ECU CAN data network and can only be activated by entering a PIN code. This gives a more secure level of security against key hacking, cloning and even ECU swapping.

Therefore, the installation of a ghost immobiliser Birmingham is a task that must be carried out with great agility and accuracy. It's like walking through a minefield. A single mistake could cause serious damage to the circuits of your vehicle. To avoid this, it's crucial that you understand the process of installation and prepare your vehicle for the installation process.

It is necessary to remove interior panels from the vehicle in order to make room for the immobiliser. Once you've found the ideal place to conceal it and secure it by using cable ties to stop it from being removed or altered. Next, tidy up the wiring by tying down loose wires, and then using insulation tape or heat shrink tubing to cover the exposed connections. This will help to minimize the risk of short circuits that are not intended to be there while also improving the appearance and reducing the possibility of tampering with by thieves.

Find a reliable source of 12V power and an earthing point for the ghost immobiliser. Once you've located them check the power cables using a multimeter. Finally, connect the CAN H and CAN L wires from the immobiliser to the identified power source and the grounding point.

Once you've made all of the necessary connections, it's important to double-check the connections and examine the immobiliser for indications of corrosion or damage. You should also test the system to make sure it's working correctly by entering a pin code and starting the engine. This should be an ongoing part of your routine as it will help to detect any issues that might be intermittent early on. Regular testing will also help to extend the life of the device, and ensure it's operating at peak performance.

Preparing the Vehicle

The installation of a Ghost immobiliser is a complicated task that requires the right tools and knowledge. A wiring diagram of the vehicle is vital to locate the right wires and making accurate connections. A multimeter can help verify electrical values and ensure safety. Cable ties and insulation tape can be used to shield the connections from damage and to ensure they are secured. A user manual is available for your Ghost Immobiliser. It will provide you with specific instructions specifically tailored to the model.

Once installed, a ghost immobiliser can prevent unauthorised engine start by requiring the owner to input a unique PIN code sequence by pressing buttons on the steering wheel or centre console. This can be done manually or remotely via a mobile phone app, and the code can easily be altered by the owner of the vehicle at any time. The device is also silent and is unnoticeable to thieves since it does not emit radio frequency.

Ghost immobilisers are directly connected to the CAN bus of the vehicle, which is a network that communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals from the ECUs and stops the engine from starting if a false signal is detected. The system is tamperproof and weatherproof, and does not include key fobs or LED indicators to attract the attention of thieves.

It can be mounted behind the dashboard or in a hidden location, so that it is not visible to thieves and doesn't hinder the vehicle's performance. It can even be mounted in a small box, making it less likely to be discovered during a test drive by unscrupulous car salespeople.

Its low-profile operation and integration with the vehicle's CAN bus network make it an effective deterrent against the latest methods of car theft, including key cloning and signal relay attacks. The system can be integrated with other security measures to create an effective barrier that can thwart even the most ardent thieves. A growing number of insurance companies suggest or require Ghost 2 immobiliser immobilisers, as they can cut down on monthly premiums.

Making the Connections

Ghost immobilisers are silent, unlike traditional security systems that can be heard by thieves. They stop thieves from knowing that your car is on. They also prevent high-tech methods of stealing vehicles like OBD hacking. They can also be fitted without causing permanent damage to your car, making them an excellent option for those planning to sell their car in the near future.

The Autowatch Ghost 2 CANbus immobiliser is among the most recent and most reliable solutions to prevent car theft. It makes use of the CAN data network to deactivate your engine and generates a PIN code that only you know, so it's difficult for criminals to recognize. It can be installed in various vehicles and integrates with a number of available features, including car alarms GPS trackers, car stolen with ghost immobiliser alarms, steering wheel locks, and door lock bypass systems.

If you choose to use a Ghost immobiliser for your vehicle, make sure to refer to the wiring schematic to identify the wires to connect. Verify their positions to ensure they're correct, and then label them or tape them to help keep track of them. You'll also need to locate a reliable power source (12V) for the system and an earthing. Once you have the necessary components, you can begin connecting them to complete the installation.

The ghost immobiliser will not allow your vehicle to start until you enter a pin code through the buttons of the steering wheel or dashboard. This will stop ECU hacking or key cloning and other techniques of vehicle theft. In addition, it could be paired with other approved by Thatcham security accessories, such as alarms and tyre clamps, to provide your vehicle with an additional degree of security.

As the UK automotive aftermarket industry grows and expand, so are the options for securing your vehicle. There are a myriad of ways for thieves to gain access into your car and take it, therefore it's vital to do everything you can to prevent it from being taken away. ghost 2 immobiliser reviews immobilisers are an increasingly popular option for car owners who are accountable.

Testing the System

The Ghost Immobiliser uses a CAN data network to communicate with the vehicle's ECU, preventing the engine from running until a specific PIN code is entered. This makes it very difficult for thieves copy the key fob that you use to start your vehicle, and even harder to disable the system by hacking its electronic.

Ghost Immobilisers are also able to be utilized together with GPS tracking devices that can aid in tracking your vehicle's location and identify it in the event of theft. This isn't an everyday feature in security products sold by the aftermarket however it's a great method to enhance your security and get assurance that your vehicle is protected.

In addition to providing enhanced security in addition to providing enhanced security, the Ghost-II immobiliser also provides a comfortable user experience by eliminating the need for additional key fobs and devices. It has a simple, easy PIN code entry that can be integrated seamlessly with your everyday routine. It also has convenience features and deactivation settings that let you to temporarily disable the immobiliser so that you can park or service your vehicle.

Prepare the necessary tools and familiarise yourself first with the wiring of your vehicle. A basic set of hand tools will give you the ability to make precise connections, while a multimeter can help determine electrical values. Insulation tape and heat shrink tubing are crucial for securing connections from short circuits, while cable tie can be used to keep the wiring in the right place. It is also essential to work in a well-lit location and wear appropriate safety gear when working with electrical tools and components.

You should test the ghost car immobiliser immobiliser after having completed the installation to make sure it is working properly. The first step is to start the vehicle without entering the PIN code. If this fails, you'll have to test the system again and conduct a more thorough inspection of the connections.

The Ghost Immobiliser, unlike other security systems, is a secret device that cannot be recognized by thieves. It is also far more effective than physical deterrents such as wheel clamps and steering locks. It is TASSA-approved and recognized by a few insurance companies. This makes it a cost-effective investment that will give you the peace of mind you deserve.