• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Electric Fireplace Wall Hanging Ideas

Unlike traditional gas or wood fireplaces Wall-mount electric fireplaces can be hung straight out of the box. They're ideal for adding ambience without venting or remodeling.

They are usually heavy and require careful installation. Follow these steps to hang your new electric fireplace properly.

1. Connect the Brackets

A wall-mounted electric fireplace or recessed electric fire instantly transforms any room. This is a great option for those who don't have a fireplace or live in apartments.

Choose where you'd like to put your electric fire. It is important to choose an area that isn't susceptible to moisture and is at least a few inches away from furniture, drapes, and areas that are prone to traffic. Mark the unusual wall mounted electric fires with layout marks that indicate the top and bottom plates for the fireplace frame.

Use a tool such as a drill to drill exploratory holes in the wall, looking for studs using a stud detector and marking the drywall for the fireplace mounting bracket locations. Next, patch and paint the drywall, or make the wall a bit bigger to prepare it for fireplace installation.

Depending on your chosen wall-mounted fire, you may be required to install the screen and firebox as one unit or separate them by an adjustable wall bracket. If you are unsure of your ability to finish this project employ a general contractor or a seasoned carpenter.

You can find an installation template that comes with all electric fireplaces. However it is recommended to keep a spirit level handy and a pencil to mark out the exact spot where the wall brackets will be placed. Utilize the template to ensure that the power cable of the fireplace is able to be connected to a nearby outlet in order to connect it.

When the studs and fireplace frame are in place, you can install a drywall that is as smooth and flush as you can for a clean appearance. Add a trim piece to the bottom of the frame, and then sand and paint the entire frame for a finished look.

You will need to insert the slots or hooks on the back of many electric fireplaces that are wall mounted into the brackets for mounting. Be sure to align the hooks or slots prior to connecting the fire brackets. Once the fire is installed you can then add additional elements such as driftwood logs, crystal embers, or decorative rocks.

2. Check the Bottom Bracket

The space above the fireplace, mantel, or chimney breast is ideal for hanging artwork. However, there's a fine line between an artistic arrangement and one that distracts from the overall look of the fireplace design.

A general rule of thumb is that a picture should not exceed at least 80% of the length of the mantel or fireplace it is placed over. This will help it remain proportionate and appear attractive on the wall. Other decorative and ornamental items placed on the mantel could influence the size and proportional guideline.

If you're going to hang an image above your electric fireplace, it's crucial that the frame is made of glass or another material that is able to withstand high temperatures. If you're not sure whether the frame is suitable, a quick test using a heat-sensitive cloth should reveal whether the frame is suitable for this kind of use.

One of the most common concerns when displaying pictures above the fireplace is the possibility of damage to the artwork from smoke or stray heat. This is not a problem with gas or wood-powered fireplace. However, if you plan to use an electric wall-mounted fire, it's important to check the instructions of the manufacturer.

Most electrical fires have an attached bracket that can be fixed to the wall using hanging screws or a wall-mounted fixing system. It is recommended that you drill exploratory hole in an area that is distinct from the wall prior to putting up your electric fire. After that, you can use an instrument to locate cables and pipes to check whether there are any pipes or cables within the vicinity of the position you've chosen for mounting.

If you have a problem the electrical sockets, you can decide to place your fire on top of the electrical socket or move it to a new location. If you decide to move it, be sure that the power cable is able to reach the electrical socket. This is essential especially for older homes and those with solid walls. If you don't do this, the electric fireplace won't function properly. Certain models have a template included that will show you where to drill the holes for this purpose and others require a spirit-level and pencil to mark the proper places on your wall.

3. Connect the Power Cord

It is possible to relocate your plug socket in front of the fireplace if you've installed a fireplace that is recessed. This can create a sleeker finish. Test the fireplace first to make sure it is operating correctly.

The third option to install an electrical fireplace is by framing the space and constructing it into the wall. This creates a polished traditional look, and also allows you to include an additional mantel. The owner's manual for the particular model will include information on framing, securing your fireplace and wiring.

When you're ready to install your new electric fireplace on the wall begin by marking the area of installation with a marker or pencil. Then, use a carpenter's level to ensure that the installation location is level and flat. You can use a studfinder mark the location so you can be sure you're drilling in a safe location.

Make use of your electric drill after you've marked the installation area to create holes for the bracket screws or hanging screws. Make sure you follow the exact instructions in the owner's guideline for this step, particularly if you're installing the fireplace within a drywall. If you're not sure how to do it then you can ask an expert for assistance.

A cable organizer kit can be used to hide power cords. These kits usually include clips, sleeves or boxes to bundle cables. You can use fish tape or wire snakes to guide the cables. If you don't want to cut into your wall or drywall, you can install a power bridge kit for cleaner and safer connections.

You can also camouflage cords using paintable wire covers, or by adhering them to the wall. Be sure to keep the cover or tacks from the source of heat however. This will avoid accidental contact and protect the cord.

4. Connect the adapter

A wall-mounted electric fires for the wall fireplace is a fantastic alternative for home renovations or for those who do not have the space or funds to install a real gas fireplace. They are easy-to-hang and ready to use straight out of the box. They are a great alternative for those looking for an elegant, modern look or warmth from a fire. They are designed to be hung like art on any wall, can be recessed, or not recessed at all, and are fully electric and have fan-powered heating.

It's a good idea to create an inventory of the equipment and tools you will require prior to starting the installation process. Go through the user's manual for specific instructions on how to mount your electric fire. Certain models require brackets to be screwed directly into the wall hanging electric fires while others might have a mounting plat that slides into slots or hookeds on the brackets. It is important to remove any combustible materials from the area where you'll be installing a fireplace that is recessed. In general the materials should be kept 3 feet from the front side of the fireplace and 1.5 feet away from its sides.

After you've checked all the components, you'll need to connect your electric fireplace and ensure that it functions properly. This is a very important step as it will ensure that the flame effect screen and heater work in the way you intended. This will give you a clear idea of the final product in its final position.

Cover the cord after you are satisfied that it's functioning properly. This will keep the final product neat and tidy. This can be achieved by installing a new outlet using an outlet cord that can be hidden behind the unit. This will provide an elegant finish to your fireplace.