• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Change a Subaru Spare Key

When you lose your Subaru car key, contact a locksmith. Usually, they will cut a new key for you much less expensively than the dealer.

Fob remote "push to start" intelligent keys or a standard metal key are the two most popular kinds of Subaru car keys. The Fob key needs to be modified.

Keyless Entry System

The key fob can be used to lock and unlock your Subaru remotely. It can also open the trunk of your vehicle or the lift gate. These remotes work with the keypad in your car to connect with your computer system inside the vehicle.

Certain models of Subaru come with a lesser-known feature called PIN Code Access. This allows you to utilize a personal number sequence to open and start your car. Check your owner's guide to learn how much to replace a subaru key fob to use this feature if you own a Subaru Forester, Outback Crosstrek, WRX STI or Impreza.

If your keys stop functioning, there's a good possibility that the battery inside the key fob is dying. The first thing you'll need to ensure is that the battery is in good condition, and you can do this using a handheld remote tester or an ordinary multimeter in your garage.

The next step is to take the circuit board of the transmitter from the key fob, and then look at it. You will see one or two sets of eight-digit numbers. Note down the first set so you can remember it. Once you've completed this, you can start programming the key fob at home. The procedure to do this is different based on the model and year of your car however it's generally easy enough to do on your own.

Key Fobs

Subaru's latest models come with key fobs that don't just open the doors but also activate your lights, lock your gas cap, and even start your car. That last trick is especially helpful if you've ever arrived at the pump only to discover that your car won't start because the battery of the key fob failed.

It is likely that your Subaru's key fob, whether it's new or old, can be easily replaced. It's important to keep in mind that the most recent models that have an advanced level of technological sophistication could require an excursion to the dealer. With a little time and effort, you can have your replacement key fob ready to go at home.

Start by opening the case and inspecting the circuit board of the transmitter. (Instructions on how much to replace a subaru key fob to open the case are usually included in the owner's manual). There should be two or more serial numbers of 8 digits each. Write down the number that is the first in the series and keep it in your wallet to refer to in the future.

Then, get into the driver's seat, and close the doors. Turn the key to start the vehicle, then turn off after 10 turns. Press the lock button on your key fob and open the door to verify that all of your doors function properly. Then shut the door and take the key out of the ignition. You should hear the chime from your vehicle, signalling that the key fob is programmed.

Ignition System

If your Subaru keys aren't working as they ought to it could be because the key battery is dead. If you have the knowledge, you can change the battery on your key fob yourself. The replacement of the battery is affordable and easy to locate. If the key fob doesn't respond to your commands there could be a different issue. It's recommended to go to a dealer to obtain an extra key. They will make sure that the key is an original Subaru key, under warranty, and that it will be programmed for your vehicle. This is much simpler and safer than buying an aftermarket key from a company online.

The dealer can also cut keys for you provided you give them your VIN number as well as proof of ownership. This information will be used to create a code for the key replacement so that it is accepted by your immobilizer. This is a more complicated procedure than cutting a key, and the dealer will charge you more.

Once the new key has been programmed, you can switch it to your existing key. You'll have only five seconds to insert the second key, which is why it's essential to keep a working key handy. You can remove the key when the security light has stopped flashing and you can test it.

Battery Replacement

Subaru fobs are very useful because they can turn on the sunroof and power windows of your car with just a single button press. The battery inside your Subaru fob isn't built to last forever, and it will have to be replaced eventually. This short guide from Capitol Subaru will help you to replace subaru key the battery yourself.

First, you'll need to locate the tiny crevice that separates the front and back of your keyfob. You can cut this gap using an flat-head screwdriver to expose the small compartment that contains the battery. Remove the old battery and then install a new one, making sure it is facing the right side upwards. Once everything is assembled, you can use your new key fob to lock or unlock your vehicle effortlessly!

You should always have a spare set of keys, especially if one is damaged or has been Lost subaru car keys. A new key can be found at your local dealership for cars or you can get one made by the locksmith. Either way, it's important to get your key fob functioning properly as soon as possible to ensure you drive in a safe manner!