• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet move around at their own pace without you having to let them in or out. They can also help keep your cat from having to go to the bathroom in the house.

It is much easier to put the cat flap on a upvc panel than on a glass one but you'll need some skills and the right tools.

Measure the Door

fitting cat flap in upvc door panel a cat door in a front door could be difficult however, provided that the cat flap is the correct one and you follow the guidelines it shouldn't be too difficult. We will show you how to draw the shape using an jigsaw to cut out the door's opening. Then we will finish the job by attaching the cat flap. This will ensure the flap is in place and shields the doors from damage caused by wind and rain.

The first step is measure the width of your pet to get an accurate measurement of the size of cat flap you will require. This will allow you to select a flap that is large enough for your pet to walk into the house and leave without having to open the door each time.

If your kit comes with a drawing showing where to drill then you can put it on the door and then draw a pencil around it. If your door has moulding or a sill at the bottom, make sure you leave enough space between your cat and the moulding or sill.

Then put on your eye protection and a dust mask, and using a jigsaw begin to cut along the line you have pencilled in, don't try to press the blade too hard as this will cause it to cut more quickly than you'd like it to. Utilize a set square to ensure that you're cutting the material correctly and that the cut is a rectangle shape. Once you are satisfied with the result, you can take the door material off.

Draw a Line

The cat flap is a great method to allow your pet to go out and in without having to worry about them being in the house with guests or leaving unwanted gifts inside the home. It also reduces drafts and helps keep the temperature in your home in a stable manner. fitting cat flap in upvc door panel a cat flap to your door may seem daunting to those who haven't tried it before. Many people will call an expert joiner or carpenter to do the job. While this is definitely an option, it is possible to complete the task yourself if you own the appropriate tools and follow the instructions carefully.

While this is far simpler with a timber door, it is still possible to do this in uPVC doors - although you must be careful to avoid damaging the doors, as this can end your warranty. First, you must take measurements of the door to ensure that it can accommodate the new cat-flap. This should be easy enough for the standard uPVC door, but you may need to take more care if you have an alternative type of door since these are more difficult to cut into than solid uPVC panels.

The next step is to determine the belly height of your cat. This is the measurement from the floor to the lower part of the cat's stomach and you'll need to find a place near the door where this measurement is within the range that your cat is able to comfortably walk through. Once you have this information you'll need to mark out the area using a pencil and a spirit level to be sure that the hole you will create will fit your cat.

After you've marked the area, it's time to cut the hole. You will require the jigsaw, and it is important that you take your time in order to ensure that the cuts are smooth and clean instead of uneven and rough, since this could damage your door. Be sure to wear safety glasses and a dust-proof mask whenever using the jigsaw, since breathing in the dust can be dangerous to your health. After you've completed the cutting, you will need to smooth out the edges of the hole with sandpaper so that your cat flap will fit easily in place.

Cut a hole

It isn't easy to fit an animal flap on a door panel or a sealed double glazing unit. You may be tempted to do it yourself, but unless you have plenty of experience with DIY, it's recommended to hire an expert to complete the task for you. A botched job could not only be ugly and unattractive, but could also be a security threat. It could let cold air to enter when the cat flap In upvc door panel (http://hl0803.com) is outdoors and hot air out when the cat is inside.

Mark the hole position on the door with an eraser and a spirit level. This will ensure it is correctly positioned and is flush with the rest of the door. You should make sure you have an sandpaper piece on ready for any rough edges.

Wear any safety gear you require when working with a power tool. If you're worried about noise, you can purchase a jigsaw with a cord that is quieter and more user-friendly.

It is best to only remove the material required to fit the flap. A little bit of extra material will be required for the thickness of the the flap but cutting off more than this can cause problems and even cause damage to the door frame.

A door made of upvc may include a metal frame, or a panel inside that could interfere with the microchip cat flap and in this case you'll need to cut an oversize hole to ensure the metal doesn't come into contact with the the cat flap, if this is done it is important to fill in the gap and render it watertight.

If you're looking to install a cat flap in a upvc or double-glazed window with metal frames, you'll need to consult a specialist. They will offer you a brand new piece of glass with the hole already made for the cat flap. This is less expensive than trying to fit a cat flap inside an existing pane of glass that was not designed specifically for this purpose.

Install the Flap

Cat flaps allow your pet the freedom to come and go whenever they want and let them relax at home whenever they'd like. If you've got an uPVC door it can be difficult to put in a cat flap, particularly in the absence of glass panes that could be cut for one. If you're looking to install a half-glazed uPVC replacement panel, it's possible to add the cat flap. It's not as simple as simply cutting a hole through wall cat flap the door, however there are some things you'll need to take care of first to ensure it's safe.

A composite, uPVC or GRP door panel is generally composed of a thin plastic skin that is bonded to an insulating polystyrene base. The material is extremely fragile and care should be taken when cutting into it to avoid damaging. This kind of door comes with a template that you can use to make the hole.

After you have marked out the hole in your front door, it is time to install the cat flap. You can pick from a range of options, from simple push-button flaps to ones that are microchip-activated and allow your pet in. Whatever kind of cat flaps you choose, it's vital that your cat can utilize the flap with ease without getting stuck in bad weather.

It is a good idea to opt for circular fittings instead of a square one, as circles are more securely cut into the door glass. This is because square holes can make the glass more susceptible to cracking if drills are used on it. It's also a much safer option as you're not at risk of drilling into toughened glass that might break and cause injury to your pet or family members. This is especially important if you have child or an elderly person living at home who could be hurt by shards of glass.