• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

The Ghost Immobiliser

Immobilisers can be an effective weapon in the fight against car theft. They prevent the vehicle from starting if it does not have an ignition key fob. They also help to stop hotwiring and other traditional types of vehicle theft. However, newer techniques like key replication and relay theft are becoming more widespread.

Designed to combat these recent trends The ghost immobiliser works to make your vehicle undetectable. It's silent and stealthy and does not rely on radio signals, key fobs or LED indicators.

Easy to install

The Ghost Immobiliser is a revolutionary device, connects to the CAN data network of your vehicle to prevent key cloning or theft. It is an TASSA approved product, and is approved by insurance companies. It is almost undetectable by thieves and operates in silence. It makes use of buttons on your steering wheel and center console to generate an individual pin-code sequence you have to enter before you can start the car. You can create up to 20 different sequences to increase security. The system is simple to install and doesn't require additional hardware.

It is recommended that you use a reputable CAN immobiliser installer that specialises in your specific vehicle type to ensure the best results. It is ideal if they have a workshop in your local area, allowing you to visit and have the installation completed. There is also an array of tools and materials that can assist you in the installation. They will have basic hand tools, multimeters insulation tape and heat shrink tubing to safeguard the connections. A user manual will give you the necessary instructions on how to wire your vehicle.

Disconnect the battery before beginning the installation to prevent short circuits or airbag deployment. Double-checking the CAN L and CAN H wires is crucial because a mistake in identification could result in a faulty integration of the system. It is also a good idea to mark the wires using tiny pieces of tape or label them with labels. Additionally, you can make use of a multimeter to confirm that the identified power source is able to provide a consistent 12V power supply.

Advanced thieves employ a variety of tactics to bypass Ghost Immobilisers. This includes jamming or spoofing. These techniques work by amplifying signals sent from the key fob to the electronic controller unit. With advanced anti-jamming technologies and constant monitoring your vehicle, it can be protected from these sophisticated attacks.

Security enhancing

Ghost immobilisers provide an extra layer to protect your car against theft. It uses a PIN security system that is entered using buttons on your steering wheel or dashboard which makes it more difficult for thieves to steal your car. The device is also designed to be hidden within the vehicle, and is devoid of any other lights or signals that would alert a potential thief to its presence. It communicates directly with the ECU of your vehicle via the data bus. This means it is not vulnerable to relay attacks or hacking.

The system is a valuable investment for those who own luxury vehicles, as they are at a higher chance of theft because of their value and their popularity. Its security features are enhanced to protect against key cloning, ECU swapping, and other threats to your vehicle's security. Some ghost immobilisers are connected to apps, which means you can arm and disarm easily. They may include a service/valet setting that allows you temporarily deactivate the immobiliser while your vehicle undergoes repairs or service.

Another advantage of a ghost immobiliser is that it doesn't require any wire cutting. This is a fantastic option, particularly if your vehicle is more recent and does not come with an immobiliser. Certain systems can also be integrated with GPS tracking devices, providing additional security to your vehicle. The use of a GPS tracker may also aid in reducing your insurance premiums. If you opt to buy an immobiliser for ghosts be sure it is TASSA certified and a professional installer will install it for you.

Compatible with all major brands and models

The Ghost Immobiliser has been designed to work with all major makes and models of vehicle protecting your pride and joy against theft. It utilizes buttons on your steering wheel, centre console or door panels to generate an individual pin code which must be entered before you can drive your car. The system is tamper-proof and undetectable. It's also backed by three-year warranty. It is also fully accredited by insurance providers This means that it can help to lower your premiums.

The Ghost system is different from traditional immobilisers that rely on the key fob for ignition control. It connects directly to the engine controller through the CAN bus. It is nearly impossible to remove, disable or hack. Additionally it is possible to use the Ghost system can be linked with an secure iPhone app that allows for remote monitoring and management.

You can choose a PIN code that is simple to remember, but mathematically difficult for thieves to determine. You can alter and customize the PIN at anytime to keep your vehicle secure, even if it is located in a parking lot or on the street. You can also set a service or valet mode if you need someone other than you to drive your car temporarily for instance, when it's in the garage for servicing. This feature will also help prevent your vehicle from being stolen by a dishonest mechanic. You can opt for the ghost immobiliser problems Call alert to give you extra peace of mind. It will notify you when your car is moving or has been moved.

Convenience

The ghost immobiliser is an effective security system, securing your vehicle from common theft methods such as key cloning, key stealing and relay attacks. It works by connecting with the car's data network CAN and blocking communication with engine ECU. This makes it hard for thieves to hack or clone your vehicle.

Once installed, you will need to enter a PIN number that is up to 20 digits using the buttons on your dashboard and steering wheel to begin the engine. The system is completely hidden and therefore unnoticeable by thieves. It doesn't emit radio frequency signals. It can also be configured to allow an individual-changeable PIN code which further adds to its security. The system is designed to prevent cutting the circuit, making it nearly impossible to alter.

If you do get lost in your PIN, there are some systems that allow you to communicate with the immobiliser through an app on your smartphone, disarming it instantly. Some systems also have a service/valet setting that allows you to start your car for instance, when you drop it off at a garage or valet park.

The Ghost Immobiliser is also inaccessible to thieves, since it doesn't transmit radio signals. This is an important advantage over other aftermarket security systems. It is also easy to use and doesn't require any complex wiring. You can also use it together with a dash camera for added safety. Dash cam Thinkware F70 features clear and crisp 1080p HD footage, Format Free Technology, and parking mode. The system can also be hardwired to ensure maximum performance and durability.

Installation

If you want to protect your vehicle from thieves it is important to select the correct immobiliser ghost immobiliser for sale. This device will help to stop car theft by blocking the communication between your engine controller unit (ECU) and key fobs. This device stops thieves from intercepting and cloning the signal that allows you to start your vehicle. It can also detect the presence of a tamper and notify the owner of the vehicle.

The device is simple to install and integrates with your vehicle's existing systems. It requires no modification to the vehicle's wiring and can be tucked away in a concealed location, such as under the dashboard. To make sure that the device is properly installed, follow instructions in the user manual. After installation, it's important to test the system. This will ensure that the immobiliser ghost is working exactly as it was intended to.

You can purchase an Autowatch ghost immobiliser price 2 Immobiliser from an approved installer and get it installed on your vehicle. The installer will connect ghost vehicle immobiliser to your vehicle's CAN Bus system, making it more difficult for thieves to take over the system or bypass it. The installation process generally takes between 2 and 3 hours.

During the installation process it is recommended that you review the wiring diagram of the vehicle model you are using. This will help you identify the CAN High & Low wires. Low wires that are required to connect your Ghost to the engine of your vehicle. It is also crucial to double-check the connections to ensure that they are secure and insulated.

Once the installation is completed, you can use the Ghost Immobiliser during normal operation. It will shut off the ignition of your vehicle if you do not start it using the correct PIN, which is something you can enter yourself. The ghost immobiliser cost can also be set to Service/Valet mode for times when you need to hand over your vehicle to service or valet parking.