• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost 2 Immobiliser Reviews

The ghost 2 immobiliser is a cutting-edge anti-theft system that utilizes advanced technology to stop car theft. The device is hidden by thieves and only starts your engine when an app or PIN code is entered.

It is weatherproof and connects to the CAN data network of your vehicle. It also has an option for service or valet that allows you to temporarily start your car while it's in garage for cleaning or servicing.

Easy to install

The Ghost immobiliser shields your car from theft of keys, cloning and hacking. It utilizes an PIN code system that is integrated into the car's electronic control unit, making it hard for thieves to identify. Contrary to traditional immobilisers it doesn't require special keys or sensors and is completely hidden with no LED indications or signals to give away its presence. It's also cheaper than replacing an ECU or installing a key fob. It can even lower the cost of ghost immobiliser of insurance.

Follow the directions of the manufacturer when installing the Ghost 2 vehicle immobiliser. This will ensure that the device works correctly and effectively. Once the installation is complete, test the system by entering the PIN code and starting the engine. Regular testing will help you spot any issues before they get worse.

Before starting the installation, double-check the location of the CAN H and L wires. They are essential to power the immobiliser, so it is essential that they are connected properly. Labelling the wires can aid in locating them during installation. Once you have located the wires, connect them to a power supply of 12V and an earthing source. Make sure you utilize a fuse tap when needed to protect the connections from damage or short circuits.

After connecting the wires, neaten the wiring using cable ties to avoid potential interference. It is also recommended to cover the wires with insulation tape or heat shrink tubing. This will protect them from electrical shorts and increase the life span of the device. Once the wiring is secure it's a good idea to test the Ghost 2 immobiliser.

The Ghost 2 immobiliser offers a service mode in situations where you may need to surrender your vehicle like when it is being repaired or valet-parked. This disables the PIN sequence temporarily. Press the brake pedal, and hold the accelerator down for a number of presses equal to the number one in the emergency code. The system will then enter service mode, which can be confirmed by flashing the indicator signal five times.

It is simple to change PIN codes

Ghost 2 immobilisers are a great way to protect your vehicle from theft. It is hidden within the vehicle and is able to be accessed by a unique code. The device is directly connected to the vehicle ECU via its data bus. It does not use radio frequency signals as do traditional Thatcham immobilisers or other aftermarket alarm systems. This makes it difficult for thieves to detect the click of a conventional immobiliser relay, or to add new key fobs. The control unit is concealed in the wiring harness or dashboard and cannot be physically altered to reset the system.

The ghost 2 immobiliser connects to your vehicle's CAN Data network. It uses buttons on the steering, door panels and the centre console to create a programmable sequence of up to twenty button presses, which must be entered to start the engine - just as a PIN. This unique system is reprogrammable and doesn't require cutting wires during installation. You can even set your vehicle in Service or Valet mode to allow it to be started temporarily when giving it to a mechanic to work.

The application can also be used to block your PIN code in the event that you've lost your keys or change it. This feature is particularly useful when you have lent your car to someone else to use as a valet parking space or for servicing, as it stops them from starting your car and taking it away without your consent. It is also inaccessible to professional thieves since it does not use any radio frequencies or circuits.

The capability of the immobiliser to stop relay thefts is a great feature. Relay theft is one of the most frequent methods of car theft. The criminals hack the diagnostic ports of your car, and then alter the signal transmitted by the car's ECU to convince it that the car's key is valid and present. This is the way traditional immobilisers are bypassed, however, with the ghost 2 immobiliser the signal is blocked before it reaches the ECU.

Simple to use app

Ghost 2 is an immobiliser that is revolutionary. It shields your vehicle from key-cloning. It connects to the CAN data network of your vehicle and demanding that you enter a PIN code before it can start the engine. It also prevents thieves from using signal spoofing and device spoofing, which are common methods employed to steal vehicles.

The system is easy to use and functions as an auto alarm that is used in a normal way. Installing the system will allow you to create an individual 20-digit PIN code that needs to be entered before starting the vehicle. This will stop your vehicle from being stolen, even if you lose your keys. If you want to deactivate the system you can do this through an app on your smartphone.

In contrast to other systems it is completely silent and does not emit any radio frequency signals. It is a weatherproof and discreet device that can be installed in any vehicle. It can be hidden in the dashboard, behind the steering wheel or door panels. It communicates through the CAN data loop with your ECU and is not affected at all by tools for detecting thieves to identify security systems. It is also not affected by jamming devices that alter codes.

It is a security system that can be used to prevent theft from all vehicles. The technology has been proven to be efficient, and it is in line with TASSA Standards. The Ghost is a fantastic choice for classic or sports automobiles. It can also be used as method to safeguard vehicles rented on apps like Turo.

The Autowatch Ghost 2 represents the next generation of auto immobilisers. The system is completely inaccessible to thieves, and blocks them starting your vehicle without your PIN or unless they have been authorized by the app. It does not emit radio frequencies or other signals that scanners detect. Installation is simple and quick. The app has an easy-to-use interface and simple navigation. It also comes with a GPS tracker that can help police locate the vehicle and then recover it.

Easy to reset

A ghost 2 immobiliser is a great way to protect your car from being stolen. It works with your vehicle's ECU to create a barrier that thieves cannot break through without a valid PIN. The device is also TASSA-certified which means it is recognized by insurance companies. It's an effective tool to stop car theft, and it could save you a significant amount of money over the long term.

Contrary to traditional alarms/immobilisers which require cutting of circuits and circuit cutting, the Ghost system is directly connected to the vehicles CAN data network and operates with the existing buttons on the dashboard and the steering wheel. You can set up a unique PIN sequence, which can be up to 20 presses in length. The PIN must be entered before the engine can be started the same way as the credit card PIN. Ghost is inaccessible to thieves and there are no indicators that give away its presence making it the most effective aftermarket CAN bus immobiliser on the market currently.

The ghost immobilisers system also has a benefit that it does not transmit radio frequency signals. This means it cannot be scanned by thieves or intercepted. This stops key attacks that are cloned and relay attacks, as well as the common method of hacking into the computer system of a car using its CAN bus by searching for signals. In addition to that, the Ghost system is designed to be completely hidden inside the vehicle, and there are no lights or signals to indicate its presence.

The system also has a Transport Mode that disables the Ghost system, which is useful for situations where you need to temporarily disable it, such as during transportation or servicing. However this mode isn't as efficient as Service Mode, as it does not deactivate the system if your vehicle goes over 31 mph for more than 15 minutes.

To reset your ghost 2 immobiliser cost 2 immobiliser you'll need the emergency code, which you can obtain from your installer. The code is typically hidden beneath the scratch-off portion of the card you received with the installation. It is important to keep the emergency code secure and store it in a place that is secure, such as your wallet at home.