• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Door Lock Replacement - What You Need to Know

When the locks on your door start to exhibit signs of wear and tear it's generally recommended to replace them. These signs can include issues with turning the lock or having a key that doesn't fit.

The good news is that installing new hardware for your door is actually quite simple. All you have to do is follow these steps.

Deadbolt

The deadbolt is the front door lock replacement cost's primary defense against forced entry. It is stronger and safer than the latch that activates the lock. So, you will want to ensure that your new deadbolt meets your needs. If possible, opt for the deadbolt made of case hardened steel that doesn't have exposed screwheads on the outside to stop unauthorized drilling. To increase security, the inside of the deadbolt should be drilled into the door frame.

When you install the deadbolt make sure that your new deadbolt's bolt slides smoothly into the strike plate after you lock and close the door. If not, you can mortise the bolt in the strike plate with a wood chisel, and then install the deadbolt. When you shut and lock your door, be sure that the latch of the doorknob is in line with the hole of the deadbolt.

Before you install your new deadbolt, check that it matches the size of the old one. Most door locks come with a template that tells you how far over the doorknob the bolt should be. However, it is always recommended to speak with an expert at a hardware store if you're not sure what backset measurement is appropriate for your doors. They will be able to direct you towards models that work with your door and the existing deadbolt opening.

After you've confirmed that your new bolt assembly is of the proper length, screw it into the hole in the door. If the new deadbolt comes with a faceplate for the latch, screw it into place as well. It's a good idea to fix the latch faceplate onto the frame with the recommended screws, and also.

Certain lock sets have an attractive or "dummy" bolt, which allows you to install the keyed-deadbolt and still have a functional latch. If you have the option that the dummy bolt is installed, it must be installed using the same screws that are used to attach the latch faceplate. This will ensure the highest security.

Some deadbolts come with one cylinder that is only accessible from the inside using a thumb-turn, while others have a double glazed door lock replacement cylinder that permits both keyed and non-keyed access. Regardless of what type you choose, it's a good idea to purchase a commercial grade lock to ensure the highest security. They are usually tested to last for 250,000 open and close cycles before being sold to homeowners.

Latch

The latch is the component of the lock that retracts the bolt to open and close the door. It is usually fastened by screws on the sides however it can be affixed to the strike plate of the jamb. It's important that you replace a door lock with the correct one for the hardware you have. You can test this by putting the latch next to your existing hardware, or by looking at the label of a replacement. Dunn Lumber carries a variety of brands, however it's best to choose the same brand of your existing hardware to ensure that you receive the latch that fits perfectly.

Some doors have an ahasp instead of latch. A hasp is a piece of strap with a slot it that allows it to be placed over a staple. The staple is then nailed to the door frame or door using nails. When the door is closed the strap pulls back on the staple and locks it into place. Commercial buildings use a hasp since it is less expensive than the lock.

Like any mechanism that has moving parts, a lock can wear out due to repeated use over time. Sometimes, the internal mechanism can begin to "stick" and become difficult to turn, requiring to replace lock on patio door the entire lockset. Sometimes, the exterior doorknob can fail and it is essential to replace it as well.

If your lock is stuck, you can apply some graphite to the keyhole. You can either dust it or spray it onto the key, and then turn the lock a couple of times to incorporate the graphite. You can also make use of a screwdriver to take off the knob and reveal the interior components and allow you to see what's happening inside.

After you've removed the knobs, locate the cylinder with two or three setscrews along the edge of the cylinder. Then tighten them by turning them clockwise. The faceplate should be removed and replaced. Surface-mounted rimlocks also have an additional set of cylinder setscrews on the back of the case that must be removed along with the faceplate.

Strike Plate

The strike plate is a reinforcement and upgrade to a locking system. It is placed to the holes for deadbolts and master key systems bolts. It helps keep intruders out by ensuring the latch of the lock is secured in the plate when the bolt is engaged. A high-quality strikeplate can increase the durability of locks as well as enhance security.

Standard strike plates are flat metal plates with a hole or several holes cut into them. It is fastened, usually by screws, to the doorway's frame to provide the latch with an area to sink into when it is closed. It is essential that the strike plate be properly aligned with the lockset to provide the best protection against break-ins.

If the strike plate on the door is damaged you must replace it as soon as you can. This will ensure that the door can close and latch correctly. The first step to replace the strike plate is to make sure that it is aligned correctly with the bolt hole inside the doorjamb. An easy way to accomplish this is to lay a piece of tape in the bolt hole, and then test the latch by closing and opening the upvc door locking mechanism replacement. If the latch doesn't catch, you should remove the tape and chisel the area so that the striker will be in line with the doorjamb.

After the area has been chiseled, it is essential to use a larger bolt to secure the strike plate. They should be at least three inches long to ensure they are securely anchored into a stud in the trim board. If you don't install the longer screws or the wood inside the doorjamb could split in the event of a kick-in attack by a burglar, and make the door vulnerable.

A professional locksmith can quickly replace lock in upvc door a damaged or worn out strike plate. They can also install new strike plates on doors that have never been fitted with them before. In addition, they can upgrade existing strike plates to increase the security of a building and enhance its appearance. This could help property owners attract tenants who are looking for a safe and secure living environment and greater peace of mind.

Keys

The key cylinder is the component of your lock that accepts a specific key to move pins into position so that the internal handle can be turned. The cylinder is the most important component of your door lock as it performs the purpose for which locks were created to safeguard you, your family, and your possessions. It is for this reason that people often get their locks rekeyed instead of being replacing them.

The process of replacing the lock is more complicated than simply replacing the existing deadbolt or handle lock. Changing the entire lock requires removal of the old cylinder as well as hardware from the door (including the handle when you have a knob lock combination) and installing a new one in its place. While there are plenty of DIY-friendly kits available that can be used to replace a lock yourself however, it is recommended you consult a skilled locksmith to ensure that the job is done properly.

It is essential to have the correct key before you can install your new lock and cylinder. A duplicate key won't work properly and could cause the lock's failure, making it impossible to open. A professional can prevent this from happening by ensuring that you have a an authentic, functioning key for your house.

The next step is to remove the faceplate and the latch plate. To remove the screws that hold them in place, you'll need the help of a screwdriver. You may want to keep them in place if the plates you are replacing are identical to the originals. This will save you time. If you need to replace them, be careful not to tighten the screws too much because doing so can affect their grip on the door.

After removing the plates you will need to determine the measurements for your new locks. While most modern locksets can fit a standard thickness of door, it's important to know the dimensions of your door in advance to avoid frustration when you go to the hardware store. It is also important to be aware that doorknob locksets will often be different sizes than deadbolt locksets. Commercial models can come with an enlarged bolt or latch.